The START S-2010 is a compact, Plaspy compatible GPS tracker built for straightforward vehicle and asset monitoring. With integrated high-sensitivity GLONASS/GPS and GSM antennas in a miniature housing, the START S-2010 delivers reliable real-time tracking and telemetry for wired installations where a permanent power connection is available. Its focused feature set is ideal for fleet managers and service providers who need a low-footprint unit that integrates cleanly with Plaspy for mapping, alerts, and reporting.
The device supports 2G cellular connectivity with a single nano-SIM and offers local configuration via USB Type-C and Bluetooth 4.0, plus remote firmware and device management through Navtelecom’s DRC system. Designed for practical, installation-friendly use in light commercial vehicles and fixed equipment, the START S-2010 combines durable power protection and flexible I/O to support ignition and door monitoring, simple immobilizer control, and external sensor telemetry when paired with Plaspy.
Key Highlights
- Plaspy compatible GPS tracker for real-time tracking and fleet management integration.
- Integrated high-sensitivity GLONASS/GPS and GSM antennas in a compact, installation-friendly housing.
- 2G modem with single nano-SIM slot plus USB Type-C and Bluetooth 4.0 for local configuration and diagnostics.
- Robust I/O: four digital inputs, one analog input (configurable as digital), and one control output for relay/immobilizer control.
- Power protection rated up to 200 V to withstand harsh vehicle electrical environments.
- No internal battery — optimized for fixed wired vehicle and equipment installations.
- Remote management and firmware updates via Navtelecom’s DRC; local setup with NTC Configurator utility.
How It Works with Plaspy
The START S-2010 streams location and telemetry to Plaspy using its built-in GNSS and 2G cellular link. Once connected to a Plaspy account, the tracker provides regular position updates, event-driven alerts, and input/telemetry states that Plaspy uses to populate dashboards, create geofence rules, and run fleet reports. Local Bluetooth 4.0 and USB Type-C access simplify initial setup and diagnostics before deployment, while Navtelecom’s DRC enables ongoing remote management that keeps devices provisioned and firmware current within a Plaspy fleet.
- Real-time location and telemetry updates to Plaspy for mapping and historical playback.
- Ignition, door, and alarm status via digital inputs for event alerts and tamper detection.
- Fuel monitoring and other analog telemetry when connected to external sensors (analog input integration).
- Remote immobilizer or relay actuation via the dedicated control output (configurable for security workflows).
- Bluetooth 4.0 support for local configuration and integration with compatible Bluetooth sensors when required.
Technical Overview
| Connectivity | 2G cellular modem; single nano-SIM; USB Type-C for local access; Bluetooth 4.0 for configuration/diagnostics |
|---|---|
| Bands | 2G (regional band variants — consult local model specifications for supported bands) |
| Power & Battery | No internal battery; wired installation only; power protection up to 200 V |
| Interfaces | 4 discrete digital inputs; 1 analog input (configurable as discrete input); 1 control output for relay/immobilizer actuation |
| GNSS | Integrated GLONASS/GPS high-sensitivity receiver |
| Bluetooth | Bluetooth 4.0 for local configuration and sensor integration |
| Remote Management | Navtelecom DRC remote management and firmware updates; NTC Configurator utility for local setup |
| Form Factor | Compact miniature housing with integrated GNSS and GSM antennas; designed for vehicle and asset wired installations |
Use Cases
- Fleet management for light commercial vehicles — reliable position reporting and event logging for route oversight and driver accountability.
- Anti-theft and immobilization — use the control output to actuate relays or immobilizers in response to Plaspy alerts or commands.
- Door and ignition monitoring — detect unauthorized access or engine state changes via discrete inputs for security and operational reporting.
- Telemetry integration — connect external analog sensors for fuel level, temperature, or other telemetry and relay that data to Plaspy dashboards.
- Fixed equipment and asset tracking — ideal for permanently wired trackers on non-powered assets or vehicles in long-term installations.
Why Choose This Tracker with Plaspy
The START S-2010 is a practical choice for organizations that need a Plaspy compatible GPS tracker focused on dependable real-time tracking, simple installation, and straightforward integration. Its compact design and integrated antennas reduce installation complexity, while robust power protection and dedicated I/O make it suitable for demanding vehicle electrical systems. With USB Type-C and Bluetooth 4.0 for easy local setup and Navtelecom’s DRC for remote device management, the S-2010 minimizes maintenance overhead and keeps fleet telemetry, ignition/door events, and relay-based immobilizer actions flowing into Plaspy for alerts, automated rules, and reporting. For fleets and service providers seeking a compact, cost-effective tracker that supports telemetry and remote control within the Plaspy ecosystem, the START S-2010 offers a balanced, reliable solution.
Set Up START S-2010
Use with a tracker
-
Set the Operator APN
CountryCarrierAPNinternet.comcel.com.coUserCOMCELWEBPasswordCOMCELWEB
- Check your tracker clock setup is set UTC-0 or GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
-
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
Server d.plaspy.com IP 54.85.159.138 Port 8888 - Add on your Account on devices with the IMEI or unique ID.
